Saturday, 28 November 2020

iOS14 Maps History BLOB Script

 

Another BLOBBY SQL (Sequel)!

A quick post to introduce a new iOS 14 Apple Maps History helper script ...
Thanks to Heather Mahalik for sharing her research and for both her and her associate Sahil's testing.
You can read about Heather's iOS14 research at her blog here.

The script (ios14_maps_history.py) focuses on the Apple Maps app's MapsSync_0.0.1 SQLite database which can contain the last 3-5 directions/searches.
There are 32 tables in the database but as we see in Heather's query below - most of the history info is stored in a table called ZHISTORYITEM and in the ZMIXINMAPITEM table. Both tables can contain protobuf BLOBs which are extracted by the script for further processing by the user along with an HTML summary report.

SELECT
ZHISTORYITEM.z_pk AS 'Item Number',
CASE
when ZHISTORYITEM.z_ent = 14 then 'coordinates of search'
when ZHISTORYITEM.z_ent = 16 then 'location search'
when ZHISTORYITEM.z_ent = 12 then 'navigation journey'
end AS 'Type',
datetime(ZHISTORYITEM.ZCREATETIME+978307200,'UNIXEPOCH','localtime') AS 'Time Created',
datetime(ZHISTORYITEM.ZMODIFICATIONTIME+978307200,'UNIXEPOCH','localtime') AS 'Time Modified',
ZHISTORYITEM.ZQUERY AS 'Location Search',
ZHISTORYITEM.ZLOCATIONDISPLAY AS 'Location City',
ZHISTORYITEM.ZLATITUDE AS 'Latitude',
ZHISTORYITEM.ZLONGITUDE AS 'Longitude',
ZHISTORYITEM.ZROUTEREQUESTSTORAGE AS 'Journey BLOB',
ZMIXINMAPITEM.ZMAPITEMSTORAGE as 'Map Item Storage BLOB'
from ZHISTORYITEM
left join ZMIXINMAPITEM on ZMIXINMAPITEM.Z_PK=ZHISTORYITEM.ZMAPITEM;
From the query we can see there 3 types of entry:
- "Location search"
- "Coordinates of search" (usually has a "Map Item Storage" BLOB in ZMAPITEMSTORAGE column)
- "Navigation journey" (usually has a "Journey" BLOB in ZROUTEREQUESTSTORAGE column)

Please note as per Heather's blog - "Time Created" (and presumably "Time Modified") are NOT accurate records of when the search was executed.

"Location search" entries (i.e. search location text) seem to be followed by "Coordinates of search" entries (containing the latitude/longitude of the search location).

When directions are requested, a "Navigation journey" entry is created with a "Journey BLOB" which contains the start/end locations.
However, "Navigation journey" entries also seem to be generated even if the user does not explicitly ask for a journey to be calculated. There were 2 such entries in Sahil's data despite him not navigating with the device.

Further research is required into these BLOBs - hence the script :)

The ios14_maps_history.py runs Heather's query and creates an HTML report (called iOS14-MapsReport.html) with links to the extracted BLOB files.
Each BLOB is extracted from the database and stored in the user's nominated output directory.
The script has been tested with Python3 on Ubuntu 20 and Win10x64.

Usage example for Ubuntu 20.04 LTS with Python 3.8.2:
python3 ios14_maps_history.py -d MapsSync_0.0.1 -o optest
This will output Heather's query to an HTML table with hyperlinks to each extracted BLOB file.
All files will be created in the user nominated "optest" directory.

The corresponding command line output looks like:

Running ios14_maps_history.py v2020-09-19

Processed 15 entries

Please refer to iOS14-MapsReport.html in "optest" directory
Exiting ...

Usage example for Win10 with Python 3.6:
c:\Python36\python.exe ios14_maps_history.py -d MapsSync_0.0.1 -o opdir
Here's what the output HTML table looks like:
 
Note: lat/longs were redacted to protect the not-so-innocent ;)

The outputted BLOBs can be researched further with tools like protobuf_inspector.
This is a very funky tool which pretty prints a protobuf and also interprets 64bit fields in multiple ways (useful for finding potential lat/longs).
Its also "pipping" easy to install ... 
pip install protobuf-inspector

Monkey has used protobuf_inspector on extracted Apple Maps protobufs to find some destination Yelp reviews and what appears to be epoch millisecond timestamps (ref. 1JAN1970) which occur just after a GUID.
However, because its not my test data and its a small sample size, I can't confirm if its the time of search ...

Anyway, this is where this post ends ... Good luck to those about to dive further into the protobuf swamp!
If you happen to use this script to find something interesting, please leave a comment and share the knowledge :)


Monday, 25 May 2020

Recovering and Replaying Garmin Voice Instructions

Wait a minute monkey, did you say Carmen or Garmin?

We had a damaged Garmin nuvi 56LM GPS unit from which we recovered a text file containing a voice log.
It was a bit of an unusual process so we thought it might be interesting to share the story.
As a result of this effort, monkey wrote a Python3 script (parse_garmin56LM.py) that uses the free espeak-ng library to convert the Garmin 56LM voice log text to WAV files for better place name recognition. The script is available from GitHub.

Special Thanks to the following people for their assistance:
Sasha Sheremetov from Rusolut for his advice with the data recovery
Ken Case from Berla for his advice regarding GPS data logs
Benjamin "BJ" Duncan for sharing his findings regarding the voice log
Katie Russ for creating her helpful website

Our story begins with a damaged Garmin nuvi 56LM which "provides easy-to-follow, spoken turn-by-turn directions with street names". Well, it used to!
Wikipedia states it was released in 2014.

Google found an interesting paper from around that time - "Garmin satnavs forensic methods and artefacts: An exploratory study" by Alexandre Arbelet (August 2014).
And while it did not cover our model, it mentioned GPX files as a potential source of GPS tracklogs.
Sounds promising eh?

Unfortunately, our device was damaged beyond repair so chipoff was our only option.
The chip was a SanDisk 8 GB eMMC chip. Multiple reads of the chip produced the same hash so the chip seemed pretty stable.
X-Ways, Autopsy, Oxygen Forensic Detective and FTK Imager did not recognize partitions from the dump.
Cellebrite Physical Analyzer's Garmin Legacy chain also did not not extract any information from the dump.
ASCII plaintext was visible in dump though so not all hope was lost.

Ken from Berla advised that Garmin usually use a FAT32 partition which contains the GPX tracklogs.
Unfortunately, the first 512 byte sector of the dump did not end with the usual 55AA for an MBR so we needed to find a way to extract the filesystems.

Sasha from Rusolut suggested using R-studio to recover/extract the filesystems from the dump.
Great Success!
There were 2 extracted partitions - FAT16 (128 MB) and FAT32 (3.3 GB - a little smaller than expected. Maybe Garmin used 8 GB chips for commonality/ease of upgrade reasons?)

Some noteworthy files were found while looking for timestamped latitude/longitude coordinates ...
Note: This was based on the contents of ONE device, other devices/models probably store their data differently.

FAT16/.System/SQLite/RecentStops.db
Contained a "history" table with scaled latitude/longitude numbers. By multiplying these raw numbers by 180/2^31, we were able to obtain plottable latitude/longitude coordinates.

FAT16/.System/SQLite/pre.db
The "route_segment" table contained timestamp and latitude/longitude route info (unsure if these were travelled).
The "history" table had start latitude/longitude, end latitude/longitude and start times.
Note: Garmin timestamps measure seconds since 31 DEC 1989 (Garmin launch date) - see here for further details.
By adding 631065600 seconds to the Garmin numeric timestamp, you have the number of seconds since the 1970 Unix epoch which then makes it easier to find the human readable time (there are more tools supporting Unix epoch time than for Garmin time).

FAT16/.System/Diag/EventLogs/*.TXT
Contained possible latitude/longitude coordinates with timestamps. However, the file also contained non-ASCII/binary bytes.

FAT16/.System/SQLite/quick_search_list.db
FAT16/.System/SQLite/recent_searches.db
FAT16/.System/Logs/searches.txt

Contained potential timestamped search information.

FAT16/.System/GPS/ARC.bin
Contained ASCII latitude/longitude strings (search for "GPS main")

FAT16/.System/Trips/Current.trip
Unknown file format which possibly contains the current trip log?

FAT32/Garmin/GarminDevice.xml
Contained various settings, version and model info.
It also mentioned a GPX directory with references to .gpx files (which did not exist in our device).
Sasha from Rusolut confirmed that his test unit had these files.
I'm not sure why there was a discrepancy - perhaps it was due to regional differences or the user settings?
Looking up the file format for GPX logs showed that they are XML text files which use certain keywords/field names to record the latitude and longitude.
Searching the entire dump for the "trkpt" and  "trkType" keywords did not find any GPX formatted data though.

All semi-interesting info so far ...
However, BJ also brought our attention to an interesting artifact that spawned this post ...

FAT32/Voice/logs/vpm_log_all.log
This text file appears to chronologically log GPS spoken instructions. Due to our lack of test devices, we can't guarantee the vehicle was at the exact location spoken but it might be used to show the user was in or aware of the area.

As an example, the voice log contained lines like:
D[2019/06/12 07:55:03] {22ce6e88} [vpm_tts_parse.c:vpm_tts_parse:3770] Navigation phrase selected: Keep right $USR_TO_NEXT_ROAD. (229)
D[2019/06/12 07:55:03] {22ce6e88} [vpm_tts_log.c:vpm_tts_log_phonetics:277] Map Phonetics: "nju "IN|gl@nd *"haI|%we (MDB Lang: 23)

The spoken voice section is the string occurring between "Map Phonetics: " and "(MDB Lang: 23)".
e.g. "nju "IN|gl@nd *"haI|%we
Another example could be:
"wE|st@n *"mo|t@|%we

The line format can be generalized as:
D[YYYY/MM/DD HH:MM:SS] {4byte hex id? process/thread id?} [vpm_tts_log.c:vpm_tts_log_phonetics:277] Map Phonetics: VOICE_STRING (MDB Lang: 23)

Where VOICE_STRING looks like a localized pronunication guide for the system.

Trivia note:
There were also various lines with the string "Voice Language: Australian English-Karen (TTS)" which seems to indicate which voice the user heard.
A bit of Googling found the voice of Karen who has also done other recognisable voice over work (e.g. Garmin GPS – Australian Karen, Navman GPS – Australian Karen, Apple iPhone 4s & 5 – Australian Voice of Siri).

"OK, Karen", there must be a system involved with the pronunciation of the string but at the time, monkey thought it was probably proprietary to Garmin.
Fast forward to a couple of weeks ago and monkey had a mini-breakthrough.
There's a system for pronunciation called the International Phonetic Alphabet (IPA).
If you've read Wikipedia or a dictionary you've probably seen these weird pronunciation symbols and sarcastically thought "Yeah that helps".
For example, the Wikipedia page for "Cooking banana" uses IPA to descibe how to pronounce "plantain".
See the highlighted text containing the weird symbols in the picture below:

Example of IPA pronunciation (highlighted text)


However, if we are limited to the 95 character printable English ASCII set, we need an additional method of encoding those weird IPA symbols. 
There are a several methods available but for our purposes, we will limit the discussion to the Kirshenbaum and X-SAMPA systems.

Looking again at the voice strings from our log - it appears they are using the X_SAMPA system. e.g. double quotes for emphasis, use of { symbols etc.

Conveniently, Katie Russ has created a website using Amazon's Polly Speech API that can take (X-SAMPA) IPA strings and convert them into sound. And with configurable voices/accents too!
You can find her website here:
http://ipa-reader.xyz/

If you're so inclined, try copying and pasting the following text:
"nju "IN|gl@nd *"haI|%we
into the website and you should hear the equivalent "New England Highway" pronounced. Very cool!

IPA-Reader Website Example


This got monkey thinking - a website is good for one or two strings but copying and pasting hundreds of entries from a device log is not practical.
Amazon Polly isn't free either so that prompted a search for a free alternative.

We found an open source C library called espeak-ng.
While you can compile/build it from scratch, Ubuntu also has it as an installable debian package. Much easier!
Note: We had issues trying to install it on Ubuntu 16.04 (probably because its no longer supported) but had no issues with Ubuntu 20.04.

Here is the espeak-ng help page for Ubuntu 20.04.
It allows users to input a (Kirshenbaum) IPA string and then hear/record the corresponding audio to a WAV file.

To install it on Ubuntu 18+, type:
sudo apt-get install espeak-ng

Then you can use it like:
espeak-ng "[[Hello w3:ld]]"
Note: string is enclosed in double quotes

Its not as polished as Amazon Polly and it can get a bit confused by some strings but it works reasonably well (if you don't mind some Steeeephen Haaaawking like ASMR)
Also note it uses Kirshenbaum strings as input and not X-SAMPA strings (like in the voice log) so some conversion is necessary.
Note: We found that the comparison/conversion chart listed in Wikipedia did not quite translate for all of our data so our script had to do some customized conversions. These conversions may not sound correct to other users depending on the language.

Here's a summary of the conversion process we figured out:
- Enclose the input string between '[[' and ']]' chracters to have the symbols interpreted rather than spelled out  
- Replace '{' characters with 'a'
- Replace double quotes " with single quotes ' for primary stress indication
- Replace '%' with ',' for secondary stress indication
- Replace 'A' with 'a'

For more details on the Kirshenbaum system see here.

For example, the voice log string is:
"h{|m@nd *"{|v@n|ju
which converts to:
[['ha|m@nd *'a|v@n|ju]]

And to hear it spoken as "Hammond Avenue" type:
espeak-ng "[['ha|m@nd *'a|v@n|ju]]"
Note: enclosing double quotes when entering via command line.

To save it as a WAV file you can use:
espeak-ng "[['ha|m@nd *'a|v@n|ju]]" -w output.WAV
Some converted strings may not sound right / recognizable so for those (hopefully rare) occasions, you can enter the voice log string into the ipa-reader.xyz website to hear the spoken phrase. It may also help to adjust the espeak-ng playback speed using the -s argument.

The Script

Now that we know how to get an audio file for one voice string, lets try automating the string extractions from the entire voice log.

Input file: vpm_log_all.txt
Output files: An HTML report table containing the original line text and line number, the converted text file for input into espeak-ng and a link to the output WAV file.

Here's the generalized script logic:
Open/Read vpm_log_all.txt
For each line:
    Extract the voice string from the line text
    Convert and write the voice string to LINENUMBER.txt
    Call "espeak-ng -s 100 -w LINENUMBER.WAV -f LINENUMBER.txt" to generate the WAV file
    Store (LINENUMBER, line text, converted voice text, WAV filename) in list

Read list
Print HTML table from list ("Log Line No.", "Log Line Text", "Processed espeak-ng string" (linked to text file), "Audio File" link)


And here is how to run it - this outputs .WAV, .txt and Report.html files to the given "op" output directory:
python3 parse_garmin56LM.py -f vpm_log_all.log -o op
parse_garmin56LM.py 2020-05-17 Initial
Directory  op  Created
185.WAV = [[*'maks|,wEl 'strit]]
...
2225.WAV = [['ha|m@nd *'a|v@n|ju]]

Processed 875 voice entries. Exiting ...
Here's the contents of the "op" output directory:



And here's what the "Report.html" looks like (with redacted timestamps):



From the above screenshot, you can see the table is pretty simple - click on the links to view either the input text file or open the WAV audio file.

Note: We tried calling "espeak-ng" from the script using the converted voice string (instead of a text file containing the string) but the generated WAV file kept getting truncated for an unknown reason i.e. words were missing. Using the text file input seemed to avoid this issue.

The script was written/tested with Python3 on Ubuntu 20.04 LTS but we only had one set of test data so it probably needs some tweaking.

Final Thoughts

We have succesfully written a script to extract and convert IPA strings from a Garmin nuvi 56LM (2014) voice log into WAV files.

The script's code (see "process_voicestring" function) for converting the voice log string to the espeak-ng input string may require some adjustment depending on the user data/language settings.

The script may also work for other models of Garmin GPS but this has not been tested.

If you see/have seen similar voice logs in other devices, it would be great to hear from you in the comments section.

Tuesday, 10 March 2020

A Monkey Forays Into USB Flashdrives


What a Feeling Indeed!


Recently monkey was tasked with extracting data from a broken USB flash drive that had previously been "repaired" by another party. It still did not work however.
The following post details the journey to getting the device working again.
It also shows the power of reaching out to more experienced experts. You never know where/when you might find that missing piece of the puzzle!

Special Thankyous to the following monkey-enablers for their assistance/advice/enduring my endless emails:
- Sasha Sheremetov from Rusolut
- Jeremy Brock from RecoverMyFlashDrive
- Maggie Gaffney from Teel Technologies USA
- Cory Stenzel (Twitter - Cory also encouraged me to write this post)
- Ryan Olson

We started with a non-functioning 16 GB USB flash drive with no case or obvious branding. The original USB connector had broken off and was replaced with a different one provided by the repairer.
The drive looked similar to this example posted by atomcrusher on Reddit:

Example of a repaired connector for a USB Flash Drive (Note: this is NOT our repair device)


Initial Observations


- Plugging the device in to a USB power source via a USB Volt/Current meter showed it was not consuming much/if any current. We did not plug it into a PC initially because we did not know what data was stored on the device (e.g. USB Rubber Ducky ). We later used an older sacrificial standalone PC during subsequent testing.

- The USB drive only used 4 pads for the connector (GND, 5V, D+, D-) so it was probably USB2. USB3 uses 9 pins (USB3 uses more data channels). The electroschematics.com website has a good introduction to USB devices here.

- There appeared to be a missing component near the activity LED.

- There was a Phison PS2251-68-5 NAND controller on one side of the circuit board and a Toshiba 16 GB Embedded MultiMediaCard (e.MMC) chip on the other side.
For older USB flash drives, the NAND controller is usually a squared shaped chip (e.g. LQFP48 = Low Profile Quad Flat Pack with 48 pins) similar to the one shown in the Reddit example pic.
The controller chip is responsible for translating the host device's (ie PC's) USB read/write instructions into commands that the memory chip can understand. The controller also looks after wear levelling of memory and determines how each write is stored (physical location/any error correction/data deletion).
The presence of an e.MMC memory chip was somewhat unexpected. Older USB flash drives typically use a single NAND controller chip and separate NAND memory chips (usually TSOP48 chips where TSOP48 = Thin Small Outline Package with 48 pins.). Here's an example diagram of a TSOP48 package from the Elnec chip reader website.
An e.MMC chip is different because it combines its own onboard memory controller with some NAND memory. The e.MMC chip package is usually BGA (BGA = Ball Grid Array). ie the signals travel via solder balls on underside of the chip. There are no other external pins like LQFP48. See Wikipedia for futher details .
A quick Google of the Toshiba part number written on the BGA confirmed that it was a 16 GB e.MMC chip.
Hmmm ... e.MMC chips are usually more expensive than regular NAND memory. Why would a USB flash drive manufacturer use e.MMC chips when there's already a dedicated Phison NAND controller chip on the board?
Sasha from Rusolut mentioned this possibility during his very informative Visual NAND Reconstructor course. Typically, e.MMC chips used in this type of arrangement are discounted factory seconds - they have a faulty/disabled internal controller but the NAND memory is OK so they're sold as cheaper NAND chips.
Interestingly, Rusolut also have a solution to read e.MMC chips via NAND interface points (ie it accesses the NAND memory directly and avoids talking to the internal controller). Unfortunately, I don't have access to that wonderful tool and NAND reconstruction into a filesystem can be very complicated and heavily device dependent. For example, two flash drives which use the same controller but run different firmwares can organize the NAND in different ways. 
Normal functioning e.MMC chips can also be removed and read via adapters (e.g. USB-eMMC adapters) that talk to the internal e.MMC controller. However, because our device's e.MMC probably has a faulty/disabled on-board controller, such a read would not be accurate/reliable.

So our initial strategy was to try to repair the flash drive, get it recognized by a PC and then image it via FTK Imager.

The Journey begins!

We started by gathering as much information about the repair drive as possible.
We Googled for any datasheets for:
- the Phison controller model
- the Toshiba memory chip model
We didn't have a lot of success finding datasheets however, we also noticed there was a serial number (POVK568FS1400311) printed on the PCB.
Googling for the serial number led us to this post by Jeremy from RecoverMyFlashDrive.
From the post's pictures, we could see the same circuit design layout, the same component labels and the same controller chip as the repair job but a different e.MMC chip (still a Toshiba e.MMC though).
To better conceptualize the layout, I recommend you check out the board pictures via the RecoverMyFlashDrive link above and have them open in a separate tab to follow along.
After finding Jeremy's post, I wrote him an email (not really expecting a reply) but Jeremy ended up becoming an incredible help.

Maggie Gaffney from Teel Technologies is a great friend always willing to help and she also teaches a course in "Board Level Repair for Digital Forensic Examiners".  So naturally, she was one of the first people I reached out to for advice.
Maggie suggested soldering to the exposed TSOP48 pads and then trying to get a read from the e.MMC chip. Unfortunately, this would also require some NAND reconstruction which I was trying to avoid.
Maggie also provided some tips about using hot air to reflow the e.MMC BGA chip. Reflowing / heating up a BGA chip with a hot air rework station can help re-connect any solder balls which have become disconnected. However, if there's any epoxy/filler between the chip and the PCB, the reflow may not work. Because there appeared to be some sort of translucent silicon filler used, I held off doing any reflow on the e.MMC chip.

I recently saw a Rusolut training testimonial Youtube video by Cory Stenzel and recognized his name from his posts on various digital forensics Google groups. Hoping that he might also be able to help, I sent him an email and was pleasantly surprised when he replied that he was familar with this monkey from attending both SANS FOR585 and Maggie's board repair course.
Cory also had some great ideas/research to share. For starters, Cory sent me this link about "Test mode" for USB Controllers.
Using the power of GoogleTranslate baked into Chrome, it seemed like a promising lead however, Cory noted that he hadn't been able to use it on an exhibit yet.
So I checked with Sasha from Rusolut who added that test mode might help troubleshoot if the (Phison) controller is working but it will not allow for data transfer from the NAND. D'OH!
However, Cory's link also had a diagram listing the pinouts for the Phison USB Controller PS2251-67. This was helpful because I was unable to find a pinout diagram for the PS2251-68-5 controller on our repair device. Ass-uming the pinouts would not have changed much/at all for such a revision, this diagram could help us determine if the controller was being supplied with the correct voltage.
Here's the pinout pic with the relevent pinout on the right hand side:

PS2251-67 Controller pinout from https://www.usbdev.ru/articles/testmod/ (use Right Hand Side)

Cory had some other good suggestions such as:
- Apply a little bit of pressure to each of the (Phison) controller pins to check that they are soldered correctly to the board. I took Cory's advice a fraction further and used a soldering iron and some flux gel to ensure each Phison pin was electrically connected to its corresponding pad. I then used a multimeter to verify the soldering reflow did not introduce any shorts between adjacent pins.
- Using a good thermal imaging camera to look for hotspots (ie potential short circuits) when the device was plugged in. Unfortunately, I don't have a thermal camera but it does seems like a worthwhile future investment.

I also asked for advice from the Teel Technologies "Physical Mobile Forensics" Google Group and Ryan Olson replied that most of the success stories he's seen involved transplanting the memory chip onto an identical donor. Unfortunately, we probably would not be able to confidently source an identical donor and  transplanting a BGA chip is not as easy as a TSOP48 (at least not for this monkey). Additionally, Rusolut support mentioned that if the controller hardware and firmware is not an exact match, the controller on the new board may erase/format data.

So to summarize our progress so far - we have a USB2 flash drive that does not draw current and is not recognized by an isolated Windows PC when its plugged in.
Plugging in a known working USB2 flash drive into the same port using the same cabling works OK before/after the damaged device. So there's something wrong with our repair device and not our test PC.

Looking at the pictures from Jeremy's post we can see that besides the controller and the e.MMC components, most of the other components are either resistors (small black rectangular components) or capacitors (varying size brown rectangular components).

After unsuccessfully plugging it into a PC, we noticed there was a missing component (labelled "BC9") next to the LED (labelled "D1"). Sourcing a replacement component was somewhat tricky because we did not know the exact make/model of device. However, by opening up a bunch of test USB2 flash drives with the same approximate age/capacity, we eventually found a similar looking LED arrangement on a Verbatim Store N Go flash drive. This reference drive used a different Phison controller but had a similar LED layout configuration. The missing component "BC9" was a capacitor connected to the LED. This was also confirmed later when we saw Jeremy's post pictures.
So using a pair of soldering tweezers and some flux, we transplanted the LED and capacitor from our test Verbatim Store N Go drive to our repair drive.
We tried our repair device again but it still could not connect. Perhaps this was all a "LED herring" after all? *crickets*

After double checking the repaired USB connector against the following pic from electroschematics.com

USB A Connector Pinouts

it appeared the previous repairer had soldered on the connector in REVERSE (ie 5 V was connected to Ground and vice versa). Some choice adult phrases may have been uttered. To quote Blackadder: "I think the phrase rhymes with clucking bell".
Silly monkey was also angry that he did not check the connector orientation first.

Hint: The outer metal of the USB connector is typically connected to Ground. By using a multimeter (on the continuity setting) with one probe on the USB ground pin and the other probe on the USB connector should indicate a connection.
Another helpful hint is to cut off the PC end (male) plug of a USB extension cable and then connect the other end of the cable (female) to your test device. This will make it easier to probe the various USB signals later. Rather than trying to fit a multimeter probe into the flash drive's USB connector (or on the pads only located on one side of the PCB), you can now connect a probe to the exposed wires of the extension cable and probe easier. Here's pic of a similarly modified cable from a stackexchange.com post here:

Use a modified USB extension cable as a tester cable
So we now know the USB Ground and 5V pins were reversed - what about the other USB pins, D- and D+? Were they reversed as well?
Fortunately, we had another test device which used the same Phison controller so we traced the USB D- / D+ pins to the test Phison controller and connected our repair device accordingly.

We plugged in our newly corrected device and still nothing ... Mother of a baboon!
Perhaps some damage was done by the reversed voltages?
Using the multimeter, we checked all capacitors and resistors for continuity and there were no shorts detected on any capacitors. Some resistors were reading 0 Ohms but apparently this is not uncommon when a manufacturer wishes to either future proof a design or use the 0 Ohm resistor as a kind of overcurrent component that blows before whatever else is downstream.
While the device was plugged into the PC, I started measuring some voltages across some capacitors and was surprised when Windows played the USB connection sound and briefly allowed File Explorer to view some directory contents. This only lasted about 30-60 seconds (long enough to grab a screenshot of a directory) but it was a good sign - the drive wasn't complete cactus. Interestingly, the volume name displayed was "Verbatim16". Unfortunately, I couldn't reconnect any further despite many subsequent attempts.

I shared this development with Jeremy from RecoverMyFlashDrive and he helpfully found a similar drive and shared some capacitor voltages that he saw on his device. One voltage in particular was different to our repair device. Jeremy observed 5 V across a capacitor "C7" connected to pin 47 of the Phison controller. On our repair device, the voltage to pin 47 was 3.7 V.
Looking at the usbdev.ru pinout showed pin 47 was the controller's 5 V supply pin. So if we could provide it with 5 V, it *might* just work.

For completeness, the controller was also getting its expected 3.3V on various controller pins - it just seemed to be the 5 V pin that was undervolted. Interestingly, the TSOP48 pins for Vcc were also getting 3.3 V so a read via the TSOP pins and reconstruction via Rusolut VNR probably would have worked as well but it would have taken me a lot more time.

My first thought was to solder a copper jumper wire from the 5 V USB pin direct to pin 47 but after cross checking with Jeremy, it was decided not to do this in case it bypassed some internal controller safety mechanisms.
After unplugging the repair device from the PC, I measured the resistance between the USB 5 V pin and pin 47. On the repaired device, the resistance was 170 Ohms. On a reference device with the same controller (but different PCB layout), the resistance between USB 5V and pin 47 was ~2 Ohms. Bit of a difference!
So on the repair device, I traced the path between the USB 5V and pin 47 and found most of the resistance seemed to be coming from "R1".
If "R1" had failed and had increased its nominal resistance, then there would be less available current to pin 47. Remember: Voltage (V) = Current (I) x Resistance (Ohms).
So I decided to replace "R1" with a 1 Ohm resistor instead. This would make the USB 5 V to pin 47 resistance on the repair device comparable in value to the reference device.

I plugged our newly modified test device into the test PC and  ... BINGO!

The drive connected / was recognized and stayed connected. I was able to grab some screenshots of each directory and then finished imaging it via FTK Imager and a software write blocker program.

Bananas all round!

Further Thoughts


Reversing the voltage on a USB flash drive isn't necessarily a permanent drive killer.

When performing data recovery, don't reach for the nuclear option first (eg chipoff / NAND reconstruction)- it might just be one or two components that require replacement.

Don't be afraid to reach out to others for advice.

With the increasing levels of on device encryption, there will be a corresponding demand for repairing damaged devices instead of removing the memory and reading off-device.
Consequently, having basic hardware troubleshooting skills will be increasingly useful.

If anyone is interested in repair courses, Maggie teaches a "Board Level Repair for Digital Forensic Examiners" course. I've been wanting to attend for a while now and hope to experience it soon.

For further repair tips/techniques, check out these Youtubers:

HDD Recovery Services
https://www.youtube.com/user/hddrecoveryservices

Justin from The Art Of Repair
https://www.youtube.com/channel/UCG8Y3ARZq5s-FyasBOGNrnQ

Jessa Jones ipadrehab
https://www.youtube.com/channel/UCPjp41qeXe1o_lp1US9TpWA

Louis Rossman
https://www.youtube.com/user/rossmanngroup

Finally, if you have any comments, suggestions or resources that can help others troubleshoot USB Flash devices, please leave a comment below.

PS Please don't ask me to recover your personal Flash Drives. Ask Google instead :)